Kylie Cosmetics Burgundy Palette Eyeshadow Tutorial 1

Heyyyy Beauties

Today, I am going to be showing you how to do a simple warm eyeshadow look using the Kylie Cosmetics Burgundy Palette.

img_9124
Kylie Cosmetics Burgundy Palette Tutorial
img_6719
Kylie Cosmetics Burgundy Palette Tutorial
img_6717
Kylie Cosmetics Burgundy Palette Tutorial

Products Used For Look

img_8406-1

1• Kylie Cosmetics Burgundy Palette

(link to my full review + swatch post on Burgundy Palette at end of post)

2• Hourglass Ambient Surreal Lighting Palette, Shade 1 (Finishing Powder)

3•  Gerard Cosmetics Eternal Liquid Liner

4•  MAC Fake Lash Mascara

5• Red Cherry Lashes in Style 46

6• Tarte Shape Tape Concealer

img_6747
Kylie Cosmetics Tutorial 1

Brushes Used For Look

• 3 x normal fluffy blending brushes. I used the Morphe M433 Blending Brush, Sigma E25 Blending Brush and a MAC 217 Blending Brush. You can use the same blending brush if you don’t have more than one, but just make sure you wipe the previous colour fully off on a towel or colour switch.

img_9360
Fluffy Blending Brushes

• 1 x slightly larger fluffy brush for eyeshadow prep. I used my Morphe M441 Blending Brush, which is slightly bigger than the above Morphe  M433 Fluffy Blending Brush that I used to apply crease colour.

img_9417
Morphe M433 Fluffy Blending Brush vs Morphe M441 Fluffy Blending Brush

• 2 x flat lid brush. I used the MAC 239 Shader Brushes for the lid. I used the normal version and my Mariah Carey Bling version, but they are both the same brush.

img_9448
MAC 239 Shader Brush

• 1 x Tapered Crease Brush/Crease Brush – I used the Sigma E45 Small Tapered Brush. Any more tightly packed together (and not as fluffy) brush will do.

img_9755
Sigma E45 Small Tapered Blending Brush

• 1 x Pencil Brush. I used the Morphe M431  Pencil Brush. Any pencil brush will do and here are just a couple examples.

img_9757
Pencil Brushes

 I will add photos of the brushes at each step so you know what brushes you need for each step. Keep in mind that you don’t need to use the exact same brand or type, just similar, which applies to all products used even eyeshadow.

img_9078-1
Kylie Cosmetics Burgundy Palette Tutorial

Burgundy Palette Tutorial 1- Step by Step

Eyeshadow Preparation 

Step One

img_8823-1

Eyeshadow Preparation 

To start prepping the eye area, apply an eyeshadow primer or a concealer all over the lids and up on the crease/brow bone area.

Today, I used the Tarte Shape Tape Concealer  and applied it all over my lid and up into my crease area. I blended this in with a Beauty Blender. This helps eyeshadow sit and stick better to the eye area, which makes eyeshadow look way better and brighter.

You can use any concealer or eyeshadow primer for this. I do prefer colored eyeshadow primers and concealers because it helps make the eye area look more flawless, but there are primers you can buy that have no colour to them and you can use them for this step if you want.

Step Two

img_6732

Eyeshadow Preparation

To further prep the eye area, dust a skin colored or slightly cream/yellow toned matte powder over the eye area using a fluffy blending brush. Apply it all over the lids and up into the crease and brow bone area over the primer/concealer. This step locks in the concealer and preps the eye area more so eyeshadow applies better.

Today, I used the first shade in the Hourglass Ambient Surreal Palette , which is a matte finishing powder. I applied it with a Morphe M441 Fluffy Blending Brush which is slightly bigger than the normal Morphe Fluffy Blending Brush I use in the crease below. You can use a normal sized fluffy blending brush for this but I like to do this with a slightly bigger brush just because it distributes product quicker.

img_9455
Morphe M441 Fluffy Blending Brush

Eyeshadow Application

Now that the eye is prepped, we can move onto the shadow. I used 7 shades in the palette , including the following;

Beach, Penny, Brick, LA, Burgundy, Dubai, Naked

img_8462
Kylie Burgundy Palette Shades Used Marked with Step Number

Step 1

img_0433

Eyeshadow Application- Working in Crease

To begin building up colour in the crease, apply the shade Beach,  which is a Light Brown Orange Matte shade, with a fluffy blending brush.

Use back and fourth sweeping motions, concentrating on the outer corner as you swipe back and fourth. As you reach the outer corner, move your brush around in circular motions before blending back towards the inner corner again.

Start with little product, and keep building up intensity until you have a nicely defined crease (not too dark, but defined).

You can use any slightly orange brown matte shade for this step. I am using my Sigma E25 Blending Brush for this part, but any fluffy blending brush will work.

img_9457
Sigma E25 Fluffy Blending Brush

Step 2

img_0483

Eyeshadow Application- Working in Crease

Next add the shade Penny, which is a Matte Red Brown shade, into the crease with a fluffy blending brush. Use the same swiping back and fourth circular motions when blending as in Step 1. Adding this shade will deepen and define the crease some more, creating a nice gradient effect.

For this colour, I used my MAC 217 Blending Brush, but again, any fluffy blending brush will do. If you are using the same blending brush as in step 1, just make sure you dust the brush off on a towel or something to get the previous colour off before you add Penny.

img_9509-1
MAC 217 Fluffy Blending Brush

Step 3

img_6736

Eyeshadow Application- Working in Crease

Apply Brick , which is a Matte Deep Red Brown shade, into the crease with a tapered/crease blending brush. This step will deepen and define the crease even more. Start with a little amount on your brush, and work up pigmentation slowly. You don’t want to add too much in one go and then wreck the look. Focus this shade more on the outer corner of the crease than the inner corner.

I used my Sigma E45 Small Tapered Blending Brush for this, but any tapered/smaller blending brush will do. The bristles in Tapered Blending Brushes are not as fluffy as normal blending brushes and are more tightly packed together, so you can add colour more precisely. Using this brush for this step helps create a gradient and ensures that each colour can be seen and are not completely overlapped.

img_9507-1
Sigma E45 Small Tapered Blending Brush

Step 4

Eyeshadow Application- Working in Crease

Take a clean fluffy blending brush (or clean your blending brush off) and go over and blend the edges of the shadow to make sure everything  in the crease is nicely blended.

img_9512
Morphe M433 Fluffy Blending Brush

Step 5

img_6739

Eyeshadow Application- Working on Lid

Now it’s time to start working on the lid. Add the shade Dubai , which is a Shimmery Deep Raspberry shade, to the inner and outer portions of the lid. Leave the middle of the lid blank because we are going to add another colour there later.

For the outer corner of the lid , I used the MAC 239 Shader Brush and made sure I was careful to get it precisely on the outer lid and not the middle lid.

For the inner corner of the lid , I used the Sigma E30 Pencil Brush. Any pencil brush will do, or any smaller brush with hard bristles that will get right into the inner corner.

Pack the shade up to the intensity you want. We will go back in and re-apply this step later so don’t worry too much about getting it extremely bright.

img_9447-1
MAC 239 Shader Brush for Outer Corner
img_6740
Pencil Brushes- Sigma E30 or Morphe M431 Brush for Inner Corner

Step 6

img_6741

Eyeshadow Application- Working in Crease

Add the shade Burgundy , which is a Deep Red Satin shade , into the crease with a Sigma Small Tapered Blending Brush to fill everything in. Any more tightly packed brush will do.

This will ensure that everything is blended together and will give an extra pop of colour and dimension to the crease

img_9507-1
Sigma E45 Small Tapered Blending Brush

Step 7

img_6742

Eyeshadow Application- Working in Crease

Add Brick into the crease again with a Fluffy Blending Brush. Use back and fourth circular motions, focusing on the outer corner but still swiping towards the inner corner too.

I used my MAC 217 Blending Brush for this step but any fluffy blending brush will do.

This will add the finishes touches to the crease area by defying it more and creating more of a gradient again.

img_9509
MAC 217 Fluffy Blending Brush

Step 8

img_6743

Eyeshadow Application- Working on Lid

Now back to the lid’s. Add the shade LA , which is a Shimmery Gold shade, to the middle part of the lid using a flat lid brush.

I used my MAC 239 Shader Brush for this part.Any lid brush will work.

After packing the lid once, I sprayed my brush with MAC Prep and Prime so that the pigmentation would be higher, but I did still did have to pack a bit on and build it up , which I didn’t care about.

img_9447-1
MAC 239 Shader Brush

Step 9 

img_6739

Eyeshadow Application- Working on Lid – Finishing Steps

Make sure the outer and inner corner of the lids are filled in with the shade Dubai. Keep packing it on until it is the colour intensity you want. We did add Dubai to the inner and outer corners in Step 5, and this step is just to pack the pigmentation up so it is bright.

I used a Morphe M431 Pencil Brush to do this part. Using a pencil brush for this step instead of a lid brush will ensure that you don’t go out of the lines when building up pigmentation.

img_9611-2
Morphe M431 Pencil Brush

Step 10 

img_6743

Eyeshadow Application- Working on Lid- Finishing Steps

Add a bit more LA to the middle of the lid with a MAC 239 Shader Brush, or any flat lid brush.

Doing this will make the colour pop even more and also helps everything look finished. At this point, we are just touching up and intensifying the look, specifically the lid shades.

After you have nice pigmentation , get a clean fluffy blending brush (or use the same and just tap any excess shadow off) and lightly blend and tap the colors on the lid together at the edges to make sure there are no harsh lines and so that the colors on the lid slightly transition into each other.

img_9447-1
MAC 239 Shader Brush
img_9512
Morphe M433 Blending Brush

Step 11

img_8823-1

Cleaning up Shadow- Finishing Steps 

Get a concealer and apply it under the eye and up to near the brow bone, so it sits on the outside of the shadow. Blend out with a beauty blender carefully, and make sure you don’t wipe too much eyeshadow off. This just cleans up the shadow on the outer part.

I used my Tarte Shape Tape Concealer for this step

Step 12

img_6744

Eyeshadow Application- Working on Brow Bone- Finishing Steps

Add the shade Naked, which is a Satin Light Cream shade to the brow bone.

I have heard people say they don’t like this shade because it isn’t extremely pigmented but I actually like it because it isn’t really harsh looking. If you want more pop on your brow bone, you can use any other brighter light shade.

For this step, I used my MAC 239 Shader Brush. Any brush with hard bristles will work.

img_9447-1
MAC 239 Shader Brush

Step 13

img_8965

Finishing Steps- Liner

Next it’s time for liquid liner.  Make a thin line from the inner corner of the eye to the outer corner. Stick really close to the lash line and do it in slow, little steps to prevent any mistakes.

Of course, you don’t have to apply liner but when I am applying fake lashes, I make sure to apply liner so it blends better. Liner also defines the eyes and makes eyeshadow look better and makes the look complete.

Today I used my Gerard Cosmetics Liquid Liner, which is a nice precise liner.

Step 14

Finishing Steps- Mascara

Apply mascara to the lashes.

Today I used the MAC False Lash Mascara in a sample size that I got. I ran out of mascara so used this and I really like it. Applying mascara before lashes will help them blend easier. Again, you can stop here and not do lashes.

img_9771-1
MAC False Lash Mascara

Step 15 

img_7900

Finishing Steps-Lashes

Apply a pair of fake lashes. For this look, I used the Red Cherry Lashes n the style 46, which are nice and wispy lashes.

You can skip this step if you want, or you can wear whatever pair of lashes you want.

Step 16

Finish Face + Lip Makeup 

Now finish your face makeup and  put on a lip colour of choice and your done! I first went for a nude lip, but then changed to a pink lip.

Now, your done!!! 

img_9124
Kylie Cosmetics Burgundy Palette Tutorial
img_9077-1
Kylie Cosmetics Burgundy Palette Tutorial
img_6719
Kylie Cosmetics Burgundy Palette Tutorial

I hope you guys liked this post, let me know in the comments below!!!

Links To My Related Posts

My Full Kylie Cosmetics Burgundy Palette Post- Kylie Cosmetics Burgundy Palette Swatches + Review

My Full Hourglass Surreal Lights Palette Post- Hourglass Ambient Lighting Edit Surreal Light Palette Review + Swatches

My Other Tutorial Posts-My Tutorial Category Page Link

My Other Eyeshadow Posts- My Eyeshadow Category Page Link

img_8406-1
Kylie Cosmetics Burgundy Tutorial 1

Where To Buy Mentioned Products ??

Kylie Cosmetics Burgundy Palette- Kylie Cosmetics Online Site Link

Sigma Brushes- Sigma Online Site Link

Morphe Brushes- Morphe Online Site Link

MAC Brushes- MAC Cosmetics Online Site Link AU , MAC Cosmetics Online Site Link USA

Tarte Shape Tape Concealer- Tarte Cosmetics Online Site Link

 Loveeeeeeee Always,

Keeley

xoxooxoxoxooo   


 Social Media + Updates/ Contact


Beauty Instagram- @keeleybellabeauty , Beauty IG

 Main/Personal/Yogi instagram- @keeleybsmith , Yoga/Main IG

 My Pinterest- @keeleybsmith , Pinterest

 My Snapchat- keeleybella , My Snapchat Add Link

Business/Blogging Email – keeleybellablogging@outlook.com

OR

Subscribe for E-mail Updates in main menu section

 

KeeleyBella© , www.keeleybsmith, 
Advertisements

Leave a Reply

Be the First to Comment!

Leave a Reply

wpDiscuz